Fusing occurs when the current is too large, cutting off the circuit. It is used to protect electrical equipment from overload and short-circuit current damage.

Ultrasonic cleaning vibrator is a device that realizes the mutual conversion of electrical energy and mechanical energy (acoustic vibration) by the piezoelectric effect of piezoelectric ceramics, and amplifies it through the front and rear radiation covers matched with acoustic impedance. It is widely used in many industries such as electronic industry, mechanical cleaning, automobile industry, aviation, medical apparatus and so on.

Piezoelectric vibrator is a device composed of two piezoelectric ceramic sheets with similar performance glued to a metal shrapnel. It uses a specific electrical signal to make the two piezoelectric ceramics vibrate and act on the metal shrapnel at the same time, so that the metal shrapnel bends and vibrates to drive the entire vibrating disc. It is the power part and core device on the vibrating disc.

The needle selection piece is made of two identical piezoelectric ceramic sheets polarized along the thickness direction. It has the characteristics of small size, fast corresponding speed, high precision, long life, high reliability, low load, low working voltage and large displacement

The sensor of the tire balancing machine is a piezoelectric ceramic with two metal sheets sandwiched fast and high sensitivity. It squeezes the ceramic by the impact force of the tire rotation imbalance to generate a certain electrical signal. It is the core sensing component of the tire dynamic balancing machine, and its performance determines the measurement accuracy of the dynamic balancing machine.

It is mainly used for accurate measurement and sorting of ceramic sheet size. Automatic operation, high production efficiency, labor saving.High sensitivity, accurate measurement, strong stability of measurement data.Remarkable results: The fully automated size measurement and size sorting and classification greatly improve production efficiency and save labor costs.

It mainly uses the polarization and performance test of the selected needle ceramic chip and classifies and files according to the performance of the ceramic chip.Automatic operation, high production efficiency, labor saving, good safety.High sensitivity, accurate measurement, strong stability of measurement data.Ceramic plate polarization, performance testing, classification and archiving are fully automated, which greatly improves production efficiency and saves labor costs.